Scope of application:This product is suitable for large banners, flags, non-woven fabrics, clothing fabric, towel, bed sheet, mouse pads and other products of the sublimation transfer printing, especially in continuous transfer into the piece of cloth. Can continuous printing, fast speed, large quantities of printing to meet customer demand.Drum diameter of 377 MM, 1.7 meters wide
4.Equipped with continuous speed adjustment system, you can adjust printing speed as you need.
5.The roller was heating up with oil and temperature heating system.
6.We can provide total service for heat sublimation print technology,
7.Get CE certificate,1year warranty
3.It equipped with the unlimited adjust system,the feed equipment can be used convenient,safe,accurate security.
4.This machine has a rolling function ,it is suite for the roll fabric printing.
Multifunctional oil roller transfer printing machine product specifications:
Drum diameter: 377MM / 420MM / 600MM / 800MM.
The conventional width: 60CM / 90CM / 1.2M / 1.7M / 2.0M / 2.2M / 2.5M/3.2M.
Note: the drum diameter 2.5 meters, 4 meters wide within can be customized according to customer requirements.
Drum diameter 377MM transfer digital paper speed of 1.5 m / min, the transfer printing plate paper 2 meters per minute.
Drum diameter 420MM transfer digital paper speed of 2.5 m / min, the transfer printing plate paper 3 meters per minute.
Drum diameter 600MM transfer digital paper speed of 5 m / min, the transfer printing plate paper 6 meters per minute.
Drum diameter 800MM transfer digital paper speed of 12 m / min, the transfer printing plate paper 15 meters per minute.
Automatic Roll Heat Transfer Sublimation Machine
The principle of heat transfer machine
(1) microcomputer intelligent temperature control \ time integrated controller, high accuracy (temperature accuracy of Â± 0.5 Â° C);
(2) heating wire and the heating plate the whole cast, safe, durable, heat distribution;
(3) heating plate coated with Teflon non-stick coating;
(4) Electronic time control, process completion signal alarm indication;
(5) pressure can easily adjust;
(6) floor installation of high-temperature silicone foam board, temperature 350 Â° C without deformation.
Heat transfer machine to use
1, the pull handle direct pressure , the heating plate is fully open. Plug in the power , turn on the power switch, indicator with bright ; Note: Due to the high power of the machine , the machine must have the proper protection of solid ground ! ! !
2, the temperature adjustment: press " +" or " - " button to set the temperature , press the " + " button to increase the temperature setting , press the " - " button to lower the temperature setting .
3 , adjust the timer knob on the left , transferred to the appropriate time to 10 seconds ( the length of time depending on material) ;
4 , when the temperature reaches the set value , the machine will automatically enter a constant temperature ;
5 , the transfer material such as clothing and flat on the printing stage, and then stacked to transfer pictures , handle the pressure forced under pressure ; Note : The pressure is not too large , otherwise it will cause deform handle the pressure ! Advance should adjust the pressure .
6, the time, the buzzer sounds , then the pressure will be put on the handle , remove the transferred material such as clothes , torn backing paper .
7 , the metal plate baking temperature is generally 170-200 Â°C, time of 20-40 seconds ; porcelain baking temperature is generally 200-220 Â°C, time of 120-150 seconds ; baking fabric temperature is generally 120-140 Â°C, time of 5-10 seconds. Heat transfer machine is a core component of the heating plate , so the choice should focus attention on heat transfer machine . Upper and lower plates should be aluminum material , and the heat pipe is cast aluminum inside. As aluminum plate is slotted , and then attached to the top of the heat pipe will cause unnecessary energy consumption , use warming will slow , constant temperature difference and other shortcomings. Under the case of iron plates or other material, long-term work under high temperature and pressure environment, it is easy to deform aging. According to a different area of the heating plate , the weight of the upper and lower plates Jieyou standard , if too light , too thin , heating panels will be easily deformed , affect use. Generally speaking , the greater the weight , the more reliable performance . Heat transfer machine on board after pressure should be , and the lower plate is absolutely parallel . If the test is close to the upper and lower plates bite can be placed in the four corners were a sheet of cardboard or other resilient material object, and then pressing the handle until the death of the upper and lower plates bite card , pulling the cardboard outward , to know whether the formation of the upper and lower plates , the machine is qualified.